Why Isn’t My DJI Controller Turning On?

Is your DJI controller giving you a hard time?

You press the power button, anticipating the drone to take flight, but nothing happens.

Frustrating, right?

Well, worry no more.

In this comprehensive guide, we will address the 10 most common issues that may prevent your DJI controller from turning on.

Whether it’s a simple reset, battery check, or troubleshooting charging problems, we’ve got you covered.

Discover how to activate, connect, and fix your DJI controller effectively.

So, if you’re wondering, “Why isn’t my DJI controller turning on?”, keep reading to find all the answers you need.

Why won’t my DJI controller turn on?

If you are facing difficulties in turning on your DJI controller, several factors might be causing the issue. Here are some possible reasons:

1. Battery Drain: Ensure the controller battery is not depleted. Connect it to a power source using the USB cable and allow it to charge for a while. Once fully charged, try turning it on again.
2. Power Button: Check if the power button is functioning correctly. Make sure it is not stuck or damaged. Press and hold the power button firmly for a few seconds to power on the controller.
3. Loose Connection: Examine the cable connection between the controller and the device it is paired with. Ensure it is securely plugged in. If required, try using a different cable to rule out any cable-related issues.
4. Software Update: Ensure that both the controller and the connected device have the latest firmware or software updates. Outdated software versions can sometimes prevent the controller from turning on.
5. Factory Reset: If all else fails, perform a factory reset on the DJI controller. However, please note that this will erase any stored preferences or configurations.

In conclusion, if your DJI controller is not turning on, check the battery, power button, connections, software updates, and perform a factory reset if necessary. By following these troubleshooting steps, you should be able to resolve the issue and get your DJI controller up and running again.

How do I reset my DJI controller?

If your DJI controller fails to turn on, a reset can often solve the issue. Here are the steps to reset your DJI controller:

1. Charge the controller: Ensure that the controller has sufficient power by connecting it to a power source using the provided USB cable. Allow it to charge for at least 10 minutes.
2. Power off the controller: Press and hold the power button until the controller completely shuts down. This may take a few seconds.
3. Perform a hard reset: Locate the small reset button on the back of the controller. Press and hold this button using a pointed object, such as a paperclip, for about 10 seconds.
4. Release the reset button: After holding the reset button, release it once you see the controller’s lights and indicators flash briefly.
5. Restart the controller: Press and hold the power button again to turn the controller back on. Ensure that the battery is adequately charged.

If the controller still doesn’t turn on, try connecting it to a different power source or contact DJI customer support for further assistance. Remember to follow the manufacturer’s instructions and safety guidelines while handling the controller.

How do I turn on my DJI remote?

If you are experiencing difficulties with your DJI controller not turning on, here are three steps you can follow to troubleshoot the issue:

1. Check the battery: Ensure that the battery in your DJI remote is fully charged. If the battery is low or drained, connect the controller to a power source using the provided USB cable and allow it to charge for at least 30 minutes.
2. Power on sequence: Follow the correct power on sequence for your DJI remote. Typically, this involves pressing and holding the power button until the LED indicators light up. Refer to your user manual for the specific instructions based on your controller model.
3. Reset the controller: If the above steps do not resolve the issue, you may need to perform a controller reset. Locate the small reset button, usually positioned near the charging port, and use a small pin or paperclip to press and hold it for about five seconds. After releasing the reset button, try turning on the remote again.

If your DJI remote still does not turn on after following these steps, consider reaching out to DJI support for further assistance. They can provide guidance based on your specific model and situation. Remember to provide them with all relevant details to expedite the troubleshooting process.

How do I fix my DJI controller not charging?

If your DJI controller is not turning on, it could be due to a charging issue. Here are some troubleshooting steps to fix this problem:

1. Check the charging cable: Ensure that the cable you are using to charge the controller is not damaged or frayed. Try using a different cable to see if that resolves the issue.
2. Inspect the charging port: Examine the charging port on the controller for any dirt, debris, or corrosion. Use a compressed air can or a soft brush to clean it gently. Avoid using sharp objects that could damage the port.
3. Verify the power source: Ensure that you are using a reliable power source, such as a wall outlet or a USB connection on a computer. Avoid using third-party chargers or hubs, as they might not provide sufficient power.
4. Reset the controller: Perform a soft reset on the controller by pressing and holding the power button for about 10 seconds. Release the button and try to turn on the controller again.
5. Test with a different battery: If possible, try using a different battery in your DJI controller. If the replacement battery works, it indicates that your original battery may be faulty and needs replacement.
6. Contact DJI Support: If none of the above steps solve the issue, it is recommended to reach out to DJI Support for further assistance. They have the expertise to diagnose and resolve complex technical problems.

By following these troubleshooting steps, you should be able to identify and resolve the issue preventing your DJI controller from charging.

How do I activate my DJI controller 2?

If you are experiencing difficulties with your DJI controller turning on, follow these steps to activate it:

1. Charge the battery: Ensure that the controller’s battery is fully charged. Connect the controller to a power source using the provided USB cable and allow it to charge until the battery is full.
2. Reset the controller: If the controller is still unresponsive, locate the small reset button on the back or underneath the controller. Use a paperclip or a similar tool to press and hold the reset button for a few seconds. Release the button and attempt to power on the controller again.
3. Update firmware: Check if there are any available firmware updates for your controller. Connect the controller to a computer or mobile device with the DJI Assistant 2 software installed. Follow the instructions provided to update the firmware of the controller if necessary.
4. Check connections: Ensure all cables and connections between the controller and your drone are secure. Inspect for any visible damages or loose components that may be causing the issue.
5. Contact DJI support: If the controller still fails to turn on after following these steps, it may be a more complex issue. Contact DJI support for further assistance and troubleshooting.

By following these steps, you can troubleshoot and activate your DJI controller, addressing the problem of it not turning on. Ensure that you give the controller enough time to charge and follow any specific instructions provided by DJI for your particular model.

How do I check the battery on my DJI controller?

If you’re wondering why your DJI controller isn’t turning on, one of the first troubleshooting steps is to check the battery. Follow these steps to ensure your controller’s battery is functioning properly:

1. Inspect the battery connection: Make sure the battery is securely connected to the controller. Gently push the battery in and ensure it is firmly seated.
2. Charge the battery: Connect the controller to a power source using the included charging cable. Check for a solid red light on the battery while it’s charging. This indicates that the battery is receiving power.
3. Check battery health: DJI controllers usually have a battery-status button or LED indicator. Press the button or check the LED to gauge the battery’s charge level. A fully charged battery should display a green light or indicate a high charge percentage.
4. Replace the battery: If the battery appears damaged or fails to hold a charge, consider purchasing a replacement battery from DJI or an authorized retailer.

Remember, a depleted battery is a common reason why a DJI controller may not turn on. Regularly checking the battery health and ensuring it’s charged can help prevent potential issues.

How do I know if my DJI battery is bad?

If you are experiencing issues with your DJI controller not turning on, it is essential to rule out a faulty battery as the potential cause. Here are some signs that may indicate a bad battery:

1. No power indication: Ensure that the battery is fully charged and properly connected. If the controller still doesn’t turn on and there’s no power indication, it’s likely a faulty battery.
2. Swollen or bloated appearance: Visually inspect the battery. If it appears swollen or bloated, it could be a sign of internal damage or a faulty cell.
3. Short battery life: If you notice a significant decrease in battery performance or it struggles to hold a charge, it could indicate a problem.
4. Overheating: Excessive heat emanating from the battery during use or charging is not normal and might indicate a faulty battery.

If you suspect a bad battery, try these troubleshooting steps:

1. Attempt using a different battery in your DJI controller to see if the problem persists. If the different battery works, it confirms a faulty battery.
2. Inspect the battery contacts and clean any dirt or corrosion that could affect the connection.
3. Contact DJI customer support for further assistance or to inquire about potential warranty coverage if the battery is indeed faulty.

By identifying a bad battery, you can take the necessary steps to rectify the issue and get your DJI controller up and running again.

How do I connect my DJI mini controller?

If you are facing issues with your DJI controller not turning on, it may be helpful to try connecting it in the correct manner. Follow the steps below to connect your DJI mini controller:

1. Ensure that both the controller and aircraft are powered off.
2. Connect your smartphone or tablet to the controller using the appropriate USB cable.
3. Turn on the DJI mini controller by pressing and holding the power button until the LED lights up.
4. Once the controller is powered on, press the power button again and hold it for a few seconds to enter pairing mode.
5. Power on the aircraft and wait for it to establish a connection with the controller.
6. Open the DJI Fly app on your connected mobile device.
7. Follow the on-screen instructions to complete the pairing process, which may involve selecting the aircraft model and confirming the connection.
8. Once the connection is established, you should be able to control your DJI mini using the controller.

If you have followed these steps and the DJI controller still isn’t turning on, it may be necessary to check the battery level, inspect the power cable, or contact DJI customer support for further assistance.

Why is my DJI fly not connecting to the controller?

If you’re facing difficulties connecting your DJI fly to the controller, there could be several reasons behind this issue. To troubleshoot the problem, consider the following:

1. Check battery levels: Ensure both the DJI fly and the controller have sufficient battery charge. Low battery levels can prevent a successful connection.
2. Confirm compatibility: Make sure that your DJI fly and controller are compatible with each other. Check the user manual or visit the manufacturer’s website for compatibility details.
3. Reset the controller: Try resetting the controller by pressing and holding the power button for a few seconds. Then power it back on and attempt the connection again.
4. Recharge DJI fly: Sometimes, the DJI fly may not connect if it has a drained battery. Charge it fully and try connecting it to the controller once more.
5. Perform a firmware update: Check if your controller’s firmware is up to date. If not, update it using the manufacturer’s official app or website.
6. Ensure proper pairing: Follow the instructions carefully to pair your DJI fly and controller correctly. Incorrect pairing can lead to connection issues.
7. Check for interference: Radio interference from other devices may disrupt the connection. Move away from sources of interference, such as Wi-Fi routers or microwave ovens.
8. Try a different cable: Faulty cables can prevent the DJI fly from connecting to the controller. Test with a different, known working cable to eliminate this possibility.
9. Contact DJI support: If all else fails, reach out to DJI support for further assistance. They can provide specific troubleshooting steps based on your model and situation.

By following these steps, you should be able to diagnose and resolve the issue preventing your DJI fly from connecting to the controller.

Can I charge DJI controller while flying?

If you’re wondering whether you can charge your DJI controller while flying, the answer is no. DJI controllers are not designed to be charged in-flight due to safety concerns and potential interference with the aircraft’s operations.

Attempting to charge the DJI controller while flying can have serious consequences, including the risk of damaging the controller, the drone, or both. It may also lead to a loss of control over the aircraft, jeopardizing the safety of the flight.

It’s important to fully charge your DJI controller before each flight to ensure optimal performance and a safe flying experience. If you are experiencing issues with your controller not turning on, there are several troubleshooting steps you can take, such as:

1. Checking if the battery is fully charged and properly inserted into the controller.
2. Inspecting the battery contacts for any dirt or debris that may be impeding the connection.
3. Trying a different charging cable and power source to rule out any potential issues with the charging equipment.
4. Resetting the controller by pressing and holding the power button for a few seconds.
5. Contacting DJI customer support for further assistance if the issue persists.

By following these troubleshooting steps, you can hopefully resolve the issue of your DJI controller not turning on and get back to enjoying your drone flights.

Conclusion

In summary, troubleshooting your DJI controller’s power issues can be a frustrating experience, but with the right steps, most problems can be resolved.

Key takeaways include resetting your controller, checking the battery connection, and ensuring proper charging.

Activating your DJI controller and connecting it properly to your drone are also essential.

If you suspect a faulty battery, it’s best to get it checked and replaced if needed.

Remember, always follow DJI’s official guides for specific instructions and consult their customer support if necessary.

With patience and careful troubleshooting, you can overcome the issue and get back to capturing stunning aerial footage.