Here’s the Parrot Airborne Mini Drones User Manual for you to check out.
Here’s the full instructions manual for Parrot Airborne Mini Drones.
Before Getting Started:
- Charging the Battery
- Switching on the MiniDrone
The MiniDrone’s On/Off button can be pressed or the battery inserted into the slot. After that, set your MiniDrone down on a level surface so it can finish initialising.
The MiniDrone’s eyes will first turn red, then amber, and finally green. The MiniDrone’s On/Off button can be pressed or the battery inserted into the slot.
After that, set your MiniDrone down on a level surface so it can finish initialising. The MiniDrone’s eyes will first turn red, then amber, and finally green.
- Downloading the App
- Connecting a Smartphone
- Description of the Control Screen
- Flat Trim
Before each take-off (especially after an impact or fall), check that the MiniDrone is
placed on a flat surface and press
- Take Off
- Controlling the Mini Drone in Flight
Flights depend on the settings for the selected control mode: Controller, Normal
or Expert. Normal mode is selected by default. To change the control mode, go
to the Control Settings section.
- Pre-programmed Aerobatics
- Adding Blocks
Up to 14 g in weight can be carried by the MiniDrone. Make sure the weight is spread equally over both sides of the MiniDrone when you stack figurines or blocks on top of it.
- Retrieving or Deleting Photos
- Max Altitude
You can restrict the highest point to which your MiniDrone can fly by selecting the Max Altitude option. The MiniDrone will automatically descend to the chosen height when it is about to exceed this threshold.
- Max Tilt
You can select the maximum tilt angle the MiniDrone can make while it is in motion using the Max Tilt option. The MiniDrone’s pitch will increase as this value rises.
The MiniDrone’s pitch will be smaller the lower this setting is. Acceleration is affected by this parameter. The MiniDrone will accelerate more quickly and respond to orders more readily when the pitch is high.
- Left-Handed Mode
The Invert Controls option allows you to invert the controls on your smartphone.
- Control Settings
You can select the desired control mode from the Expert, Normal, and Controller selections. See the Flight control section of this handbook for further details on control modes.
- Automatic Recording
In Controller mode, only the Auto Rec option is accessible. As soon as you push Take Off, it is used to instantly start capturing videos. See the Video section for further details about recording videos.
- Max Vertical Speed
When you hit the or buttons, the MiniDrone will fly at its fastest maximum upward and downward speeds that you have chosen in the Max Vertical Speed setting.
- Max Rotation Speed
The Max Rotation Speed option allows you to set the maximum rotation speed
for the MiniDrone
The Short-Circuit option allows you to cut the motors in the event of prolonged
impact to the propellers on your MiniDrone.
- Charge Settings
The Charge Settings screen shows you the last type of charging used and the
battery level of your MiniDrone.
- Network Name
- Precautions for Use and Maintenance
- Accessories and Spare Parts
- Recycling this Product
- Declaration of Conformity
- Registered Trademarks
- Notice Regarding the Right to Privacy
Jon is a passionate photographer and videographer who has been flying DJI drones for over 5 years. He loves the freedom and creativity that comes with capturing aerial footage and the unique perspective it provides. Jon is always on the lookout for new locations to explore and capture with his DJI drones. His favorite DJI drone is the Mavic 2 Pro, which he uses to capture stunning 4K footage with its Hasselblad camera. Jon is always eager to share his knowledge and experience with other drone enthusiasts and is a member of several online drone communities. When he’s not flying his DJI drone, Jon enjoys hiking, camping, and spending time with his family.