Here’s the PowerVision Poweregg X Drone User Manual for you to check out.
Here’s the full instructions manual for PowerVision Poweregg X Drone.
Product File:
- Before Flight
- Download App and Watch the Tutorial Video
- About PowerEgg X
- Introduction
- Diagram of PowerEgg X Parts
- Smart Battery
- Functions
- User Sign Up
- How to Sign
- Forgot Password
- Activation
- Firmware Update
In each mode, PowerEgg X’s firmware needs to be upgraded. The remote controller and drone’s firmware will both be upgraded while in drone mode.
Only the drone’s software will be updated when in AI camera mode. If both the drone and remote controller firmware in the drone mode have fresh updates, the drone firmware will often be updated first before the remote controller.
Firmware upgrades come in two varieties: required and optional. Bug fixes and performance enhancements are recommended updates but are not required.
The gadget will still function normally even if the updates are skipped. Critical updates are among those that must be downloaded; without them, the device cannot function.
AI Camera Mode:
- Prepare the AI Camera
- Introduction to Vision+ 2 App
- Photos
Single shot, HDR, continuous shot, and AEB continuous shot are all supported by PowerEgg X. Determine the shooting mode. The image will have the matching icon shown at the top.
- Videos
PowerEgg X supports 4K 60fps video shooting, which allows you to create ultra-clear footage.
- Slow Motion
For slow-motion, PowerEgg X supports both FHD 120 FPS. With the button in the upper right, changing the shooting mode is simple.
- Time-Lapse
PowerEgg X uses time-lapse photography to capture changes in things like traffic, cloud orientations, and more over extended periods of time in a quick video that lasts only a few seconds.
- Autonomous Personal AI Camera
Autonomous Personal AI Camera Function: The PowerEgg X camera has the ability to detect and identify individuals, vehicles, and some other things. Once a target is picked, it can also follow that target by rotating its gimbal.
- Gesture Control
PowerEgg X will recognise specific actions you make and begin snapping photos or recording films for you. It now supports four gestures and their associated operations.
- Gimbal Settings
Three gimbal modes are available on the PowerEgg X: follow, lock, and FPV. To change modes, press the “Gimbal Mode” button.
- Live Streaming
With PowerEgg X, you may not only capture fantastic films but also live stream the wonderful moments to your loved ones and other people. Weibo Live Streaming Platform live broadcasting is currently supported by PowerEgg X.
Drone Mode:
- Preparing the Drone
- Remote Controller
PowerEgg X has a remote controller that can be used to fly the drone while also receiving signal from a selected data link and sending real-time, high-resolution video back to your mobile device via the Vision+ 2 App.
- Operations of the Remote Controller
- Powering on/off
- Charging
Use a Micro USB cable to connect the remote controller to the power adapter so that it may be charged.
When the remote controller is fully charged, the power indicator remains solid green rather than blinking. The battery will need to be charged for roughly two hours.
- Operating the Gimbal Camera
- Operating the Remote Controller
- Controlling the Drones
- Switching Flight Modes
- Return to Home(RTH)
To start return-to-home, hit the RTH button and hold it for two seconds. The drone will land at the last known home location.
You may regulate the right speed and altitude with the remote controller, which beeps during the return. To reverse the return, press the RTH button once again.
- Customizable Button
- Power Saving Hibernation
After five minutes of inactivity, the remote controller will beep, and you can reset it by toggling any stick. After more than 10 minutes of inactivity, the remote controller will turn off automatically.
- Optimize Transmission Zone
When the antennas are parallel to the drone and kept pointing in the same direction, as shown below, the transmission between the drone and the remote controller is most dependable.
- Paring the remote controller
- Introduction of Drone
- Drone Status Indicator
PowerEgg X has mode status indicators (headlights) and light status indicator
(tail light) on the drone body.
The front of the drone contains mode status indicators that show if PowerEgg X has been converted to drone mode. The indicators will always be solid red when in drone mode.
The drone’s flight status indicator shows how well its light control system is functioning.
- Propellers
Prior to delivery, the drone and remote control were linked. The three LEDs on the controller’s left side flicker sequentially to show that the remote controller is looking for and attempting to connect with the drone. The connection between the drone and remote controller is complete when the blink ceases.
- Vision System
PowerEgg X is equipped with forward-facing and downward-facing stereo vision cameras, as well as vision technologies that enable it to see obstacles in those directions and analyse its surroundings to better comprehend its situations. The drone’s nose and bottom both house the forward and downward vision systems.
- Basic Flight Modes
- Return to Home
- Smart Flight Mode
- Smart Following Shooting Mode
- Point Of Interest
The drone can autonomously y around a target, the user can control the
radius and speed while take photos/ videos.
- Quick Shot
Users can choose from a few preprogrammed light paths using the QuickShot function, which presently supports the following: receding, skyward, surround, spiral, and ellipse.
- Drone Flight
Before beginning, please carefully read the handbook. Find a space that is open and correctly configure the drone. For safety reasons, DON’T go over the 500-meter limit for the height ceiling.
Please abide by all applicable rules and regulations, and for safety information, read the PowerEgg X Disclaimer and Safety Instructions.
- Flight Safety
- Pre-Flight Inspection
- Automatic Takeoff and Landing
- Arm/Disarm the Motors
- Example of Introductory Flight
- Fly in the Rain and Takeoff/Landing on the Water
- Water-proof Drone
In the rain, a PowerEgg X drone with a waterproof protective case can be used. For the PowerEgg X to generally function in humid, rainy environments and other environments where water may splash.
The waterproof protective case creates a barrier along the contract surface between itself and the arms with a rubber sealing strip in order to prevent damage to the body from water ingress.
- Flight in Rain and Takeover/Landing on Water
Appendix:
- Vision System Calibration
- Compass Calibration
- Technical Specifications
Also Read:
Jon is a passionate photographer and videographer who has been flying DJI drones for over 5 years. He loves the freedom and creativity that comes with capturing aerial footage and the unique perspective it provides. Jon is always on the lookout for new locations to explore and capture with his DJI drones. His favorite DJI drone is the Mavic 2 Pro, which he uses to capture stunning 4K footage with its Hasselblad camera. Jon is always eager to share his knowledge and experience with other drone enthusiasts and is a member of several online drone communities. When he’s not flying his DJI drone, Jon enjoys hiking, camping, and spending time with his family.
