Here’s the JJRC YiZhan Tarantula X6 Drone User Manual for you to check out.
Here’s the full instructions manual for JJRC YiZhan Tarantula X6 Drone.
Standard Equipment:
Nomenclature:
Parts of Installation:
Main Parameter:
Transmitter Battery Installation:
Charging Batteries:
Please turn on the remote control and, as shown in the illustration, insert the Li-po battery into the charge plug on the E728.
Battery and Charger Specifications:
Binding of Radio Transmitter and Receiver:
Switch on the remote. Link the helicopter. Place the battery and PCB cable together. Level ground.
The helicopter LEDs turn on static before beginning to blink. Drive the Throttle Stick UP HIGHEST DIRECTLY point, PULL it back down gradually, and then.
The binding procedure is finished. both the helicopter will react to commands from the Remote.
Turn off the transmitter. If the transmitter is not to be used for a long duration, please remove the battery for storage.
Hyper IOC Function:
Excellent Orientation Mode; starts and flies in any orientation. There is no need to be concerned about losing direction if it flies far away.
Flight Adjustment and Setting:
Don’t let the flight apparatus take to the air until you are comfortable with it; instead, carefully study the instructions.
Learn how to use every type of direct control, then practice it over and over until you can use it to carry out your wishes.
Flying Environment:
Flying Practice:
3D Flip Flying:
When you master the ability to control the drone in flight, you should try advanced flying maneuvers like rolls and flips.
Please hover the helicopter at a constant height of three metres above the ground, then quickly release the elevator sticker after pressing and holding the flip stunt button. Instantaneously, the helicopter will make a forward 3D flip.
Problems and Solutions:
Strong and Unique Design:
Extremely successful testing of X6 has demonstrated the stability and robustness of this cutting-edge new design.
Parts List:
Accessories Figure:
Also Read:
